GUIDE: Replace the top loop with a screw on your sauna tent

If you frequently use a weather protection ( Fiberglass roof for sauna tents ), we recommend replacing the top loop in the tent with a screw.

The reason is that the top loop can otherwise rub against the inside of the weather protection when the tent is set up for longer periods – especially in wind or movement. Over time, this can wear on the fabric. 

Simple solution:

You don't need the loop to set up the tent – just push the roof upwards from the inside, and it will unfold as usual.

🔧 How to change:

• Loosen the nut with a 10 mm wrench.

• Gently pull out the loop – without disturbing internal components – and quickly insert an M6 screw into the hole while everything is aligned.

• Tighten the screw with a 4 mm hex key.

The result: a smooth, discreet installation that is gentler on the weather protection – without affecting functionality. The loop can easily be reattached if needed.